General: 

• Lockers can be ordered fully-assembled or knock-down for assembly at destination.
• Order 3-wide units for best value. Order 1-wide units to complete quantity needed for each continuous row.
• Aluminum number plates (#1-up) with mounting hardware are included. Number plate face is black with silver etched numerals. If a special numbering sequence is required, please specify when ordering. Number sequence must be consecutive numbers equal to the number of openings (doors) ordered.
• Built-in key locks are included
  

Hybrid - Wood & Metal Lockers
STANDARD FEATURES

• body construction: Knock-down, 24 gauge sheet steel
• body styles: Single, double and triple tier
• DOOR: Furniture grade red oak plywood, finished with 3 coats of lacquer
• Coat Rod: Standard for single and double tier
• HOOKS: Two single hooks per single and double tier opening. One double prong ceiling hook for triple tier.
• SHELVES: Hat shelf in single tier lockers only.
• Finish:
  • Doors: Natural red oak
  • Frame: powder-coat - color: Midnight Ebony
    
• handle: Built-in key lock is standard
• hinges: Continuous piano type
• LEGS: 6" high legs are standard. Lockers without legs are available at a nominal charge legs
• APPEARANCE: Color: black frame with red oak doors
• NOTE: Other optional locking methods also available
  
• warranty: One year

 

*Custom designs, sizes and wood species are available upon request

Contact Factory for non-stock configurations or custom wood species:
1-800-776-1342

 

 

CLICK PHOTOS TO ENLARGE

 

W	D	Opening Height	Frame Height	Tier	Group	KD Cat #	Fully Assembled Cat #	Color
Single Tier
12	18	72	78	1	1-wide	UW1288-1MEW	UW1288-1A-MEW	Red Oak
12	18	72	78	1	3-wide	UW3288-1MEW	UW3288-1A-MEW	Red Oak
15	18	72	78	1	1-wide	UW1588-1MEW	UW1588-1A-MEW	Red Oak
15	18	72	78	1	3-wide	UW3588-1MEW	UW3588-1A-MEW	Red Oak
Double Tier
12	18	36	78	2	1-wide	UW1288-2MEW	UW1288-2A-MEW	Red Oak
12	18	36	78	2	3-wide	UW3288-2MEW	UW3288-2A-MEW	Red Oak
15	18	36	78	2	1-wide	UW1588-2MEW	UW1588-2A-MEW	Red Oak
15	18	36	78	2	3-wide	UW3588-2MEW	UW3588-2A-MEW	Red Oak
Triple Tier
12	18	24	78	3	1-wide	UW1288-3MEW	UW1288-3A-MEW	Red Oak
12	18	24	78	3	3-wide	UW3288-3MEW	UW3288-3A-MEW	Red Oak

 

Accessories:

Width	Depth	Height	Catalog #	Color
Closed Front Base
12		6	KCFB12ME	ME
15		6	KCFB15ME	ME
Closed Side Base
	18	6	KCSB18ME	ME

 

 

 

 

 

 

 

General: Lockers shall Be "ART METAL PRODUCTS® Metal / Wood Hybrid KD Wardrobe and Box Lockers" as manufactured by ART METAL PRODUCTS or approved equal.  Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion.  Make all exposed metal edges safe to touch.  Weld frame members together to form rigid, one-piece structure.  Weld, bolt, or rivet other joints and connections as standard with manufacturer.  Grind exposed welds flush.  Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plate.

Finishing:  All steel locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish.  Color to be selected from manufacturer's standard list of colors.  All steel locker components shall be 708 Midnight Ebony.

Frame:  Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members.  Cross frame members of 16 gauge channel shapes, including intermediate cross frame members on double and triple tier (frames with doors over 18" high) lockers shall be securely welded to the vertical framing members to ensure rigidity.  Rubber bumpers shall be provided to cushion door closing.

Wood Wardrobe Doors: Doors shall be fabricated of furniture grade red oak plywood, covered by red oak veneer, and finished with a 3-coat lacquer finish.

Door Hinges: All doors shall include a 16 gauge continuous piano hinge fastened to the door with screws and riveted to the frame.  All doors to be right hand, side hinged..

Body:  Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending full height.  Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single return bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame members at not less than one place in addition to side panels.  Form hat shelves at 60” and 72” high single tier lockers of 24 gauge (minimum) sheet steel with single bends at sides and back and a double bend at front.

Locks:  Shall be cylinder cam locks and shall be master keyed to one system for the entire project.

Equipment:  Furnish each locker with the following items, unless otherwise shown.

• Single tier lockers:  Openings 60” and 72” shall include one hat shelf, one coat rod and two single prong hooks.
• Double tier lockers:  Openings 30” and 36” high shall include one coat rod and two single prong hooks.
• Triple tier lockers:  Openings 20” and 24” high shall include one double prong ceiling hook only.

One-Year Warranty:  AMP Metal / Wood Hybrid KD lockers are covered against all defects in materials and workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this section for a period of one year.